The Fastrack Extreme Plug & Play Wireless CPU® has the same form factor as the Fastrack Supreme and is dual-mode 2.75G EDGE and 3.5G HSDPA with a world wide coverage, ideal for applications requiring high performance throughput. It is electrically backwards compatible and supports Open AT® applications.
KEY DEVICE FEATURES
Core processor
ARM 946, 32 bit, 104MHz running Open AT RTOS as standard
Memory
Internal 32 Mb Flash and 8 Mb PSRAM
Digital Control
2 GPIOs
Digital Comms
1 UART, 1 USB
Analogue Interfaces
no
Audio Interfaces
1 analog differential audio (not connected)
Cellular Radio
Supporting quad band EDGE, tri band HSDPA
Cellular Data
GSM standard, SMS, GPRS cl10, EDGE cl10, WCDMA, HSDPA
Cellular Voice
no
RF and IO connectivity
2 RF SMA connections to support diversity
Dimensions
L73 x W54.5 x H 25.5mm
Click the Open AT® Software tab for information on cellular wireless software features. Note that features such as MIPS and current consumption are variable depending on the OS used.Not sure which Wireless CPU® is right for you?Compare features with the Wavecom Product Catalogue.

Fastrack Supreme features an open-standard expansion card interface, enabling you to add additional IO connectivity or features like GPS, WiFi, Bluetooth, Zigbee and more. Use Wavecom expansion cards or develop your own – available cards include additional IOs, USB and GPS. For an overview of expansion possibilities, click here.
KEY DEVICE FEATURES
Core processor
ARM 946, 32 bit, 104MHz running Open AT RTOS as standard
Memory
Internal 32 Mb Flash and 8 Mb PSRAM
Digital Control
2 GPIOs (many more thanks to IESM)
Digital Comms
1 UART (many more thanks to IESM)
Analogue Interfaces
no (many more thanks to IESM)
Audio Interfaces
1 analog differential audio (many more thanks to IESM)
Cellular Radio
Supporting quad band EDGE
Cellular Data
GSM standard, SMS, CSD, GPRS cl10 , EDGE cl10 (for FAstrack Supreme20 only)
Cellular Voice
Quad codec (FR/HR/EFR/AMR), VDA2A
RF and IO connectivity
1 SMA connector for EDGE RF, SUB D connector for power supply, reset, boot
Dimensions
L73 x W54.5 x H 25.5mm
Refer to the Open AT® Software tab for additional features, noting that features such as MIPS and current consumption are variable depending on the OS used.

More about ATEX
WMP120 is an ATEX certified industrial microprocessor with wireless modem functionality - a single chip solution that allows you to embed your own application software directly onto the device. The BGA form factor and dedicated IOs are suited for automated component placement and enables you to optimize your total system cost.Contact us for information on sourcing the external memory at preferential terms.
KEY DEVICE FEATURES
Core processor
ARM9, 32 bit, 104 MHz running Open AT® RTOS as standard
Memory
External, supports up to 128MB Flash, 128MB PSRAM
Digital Control
Up to 44 GPIO, 4 INT, I2C, 2 SPI, 5 x 5 keyboard, memory bus
Digital Comms
2 UART, USB 2.0, parallel port
Analogue Interfaces
4 ADC, DAC
Audio Interfaces
2 analogue channels, PCM
Cellular Radio
Global operation (quad band 800/900/1800/1900 MHz)
Cellular Data
GSM standard SMS, Fax, CSD (circuit), GPRS cl 10 (packet)
Cellular Voice
Quad codec (FR/HR/EFR/AMR)
Package
BGA576, 25x25x3 mm, 0.5Ø balls at 1 mm pitch
Click the Open AT® Software tab for information on cellular wireless software features. Note that features such as MIPS and current consumption are variable depending on the OS used.Not sure which Wireless CPU® is right for you?Compare features with the Wavecom Product Catalogue.

WMP150 is a microprocessor with wireless functionality, designed for automotive applications. It is a high quality, single chip BGA solution, fully compatible with WMP100 and manufactured in accordance with automotive guidelines.Contact us for information on sourcing the external memory at preferential terms.
KEY DEVICE FEATURES
Core processor
ARM9, 32 bit, 104 MHz running Open AT® RTOS as standard
Memory
External, supports up to 128MB Flash, 128MB PSRAM
Digital Control
Up to 44 GPIO, 4 INT, I2C, 2 SPI, 5 x 5 keyboard, memory bus
Digital Comms
2 UART, USB 2.0, parallel port
Analogue Interfaces
3 ADC, DAC
Audio Interfaces
2 analogue channels, PCM
Cellular Radio
Global operation (quad band 800/900/1800/1900 MHz)
Cellular Data
GSM standard SMS, Fax, CSD (circuit), GPRS cl 10 (packet)
Cellular Voice
Quad codec (FR/HR/EFR/AMR)
Package
BGA576, 25x25x3 mm, 0.5Ø balls at 1 mm pitch
Automotive
PPM level, -30°C to +85°C, automotive manufacturing
Click the Open AT® Software tab for information on cellular wireless software features. Note that features such as MIPS and current consumption are variable depending on the OS used.Not sure which Wireless CPU® is right for you?Compare features with the Wavecom Product Catalogue.

Wireless CPU® Range
Reduce your system cost, get to market faster, provide innovative added value and reduce your operating costs with Wavecom’s Wireless CPU®s! All Wavecom products can be used as simple wireless modems. Some of them can be used as smart modems, sharing system load. But to offer you the ultimate competitive advantage, most of them also allow you to embed your software application on the powerful AMR9 core of the Wireless CPU® itself, cutting material costs to the bone. If you decide to upgrade to the benefits that an integrated solution offers, Open AT® provides you a smooth path to do just that.